BTF2322-40 module-anti-interference+rapid networking, full protection of high-rise and forest rescue signals In fire rescue, "uninterrupted communication" means "uninterrupted vitality". The BTF2322-40 module of Yanuoxun relies on the company's wireless image Transmission technology for more than ten years, and has become a "communication lifeline" in complex fires-the transmission distance of 50-200 kilometers covers a large fire area, and the code rate of 47Mbps allows infrared thermal imaging images to be transmitted back in real time, providing an intuitive basis for rescue decisions. Its core advantage lies in "extreme environmental adaptability": COFDM modulation technology is resistant to multipath interference and can keep the signal stable even if the smoke is blocked; The 4-hop 16-node ad hoc network can expand with the movement of the rescue team to avoid communication interruption caused by the spread of fire. 80W power consumption adapts to emergency power supply to ensure long-term operation without downtime. The hardware design fully considers the rescue operation: the size of 17510628mm is convenient for vehicle-mounted or portable deployment, and the weight of 520g is suitable for manual carrying; The 2-port+3-port can be directly connected to the camera and walkie-talkie to realize the synchronous transmission of "picture+voice". AES256 encryption meets the emergency data security standards. From the practical point of view, the module has been verified in high-rise rescue and forest fire fighting: the terminal carried by firefighters can receive the instructions from the command center in real time, and the pictures returned by drones help to judge the position of trapped people, and use stable communication to escort the rescue efficiency and safety. FAQ： 1.Can the communication between UAV and the ground be stable in a high-rise fire? The module supports 25-200 km transmission. When the Drone shoots at high altitude, even if there is a floor cover, it can still keep the connection with the ground terminal through signal refraction, and the picture is not interrupted. 2.How to build a temporary communication network quickly? Mmesh ad hoc network is supported, nodes are automatically identified and connected after startup, and a rescue site communication network can be built within 2 minutes without manual configuration. 3.Do you need a dedicated power supply for 80W power consumption? It can adapt to the rescue vehicle's 12V/24V power supply and portable emergency power supply, without special power supply equipment, and meet the demand of "rapid deployment" on the rescue site. 4.Can thermal imaging images and voice commands be transmitted at the same time? Yes, the code rate of 47Mbps supports the synchronous transmission of thermal imaging pictures (looking for trapped people) and voice commands, and realizes the two-way cooperation of "picture+voice". WELCOME TO CONTACT US!
